Bolton Construction & Service provides water heater repair in Clayton, Raleigh, Holly Springs, Durham, Morrisville.
However, if you need some tips that you can try yourself, read on: 
- Check the power supply: Before diving into any repair work, make sure to turn off the power supply to the water heater. This will prevent any electrical accidents and keep you safe during the repair process. Locate the circuit breaker or switch dedicated to the water heater and turn it off.
- Inspect the pilot light or heating element: If you have a gas water heater, check the pilot light to ensure it is lit. If it’s out, relight it according to the manufacturer’s instructions. For electric water heaters, examine the heating elements to see if they are functioning properly. If an element is faulty or burned out, it may need to be replaced.
- Check for leaks and drips: Inspect the water heater and its connections for any signs of leakage or dripping. Check the pressure relief valve, drain valve, inlet, and outlet connections. If you find any leaks, tighten loose connections or replace faulty parts, such as valves or gaskets.
- Flush the tank and remove sediment: Over time, sediment can build up in the tank, reducing the efficiency and lifespan of the water heater. To flush the tank, turn off the water supply to the heater, connect a garden hose to the drain valve at the bottom of the tank, and drain the water into a suitable drain or outdoors. This helps remove sediment and mineral deposits. Once drained, close the drain valve, refill the tank, and turn the power back on.
It’s important to note that water heater repairs can vary depending on the type of heater and the specific issue you’re facing. If you’re unsure about any step or the repair seems complex, it’s best to consult a professional plumber or technician for assistance. Please call us because we are here to help you out!